Ignite HomeConnect app using your MyRogers username and password. If the Get Started screen does not appear right away, select the Activate Ignite WiFi Gateway. Wait about 5 minutes for the setup to finish. Within 5 minutes, the light on your Gateway should flash and turn orange, then green, then turn either solid or blinking white.
Please note: you need a modem to connect to your eero router. If your modem is built into your current router (also known as a modem-router), then you will need to connect your eero to your existing router. The first eero device should be connected to either your existing cable, fiber, DSL modem, or modem-router ; STEP 4: Create your eero network
Follow our Easy Connect tutorial to install your Panoramic Wifi Internet Gateway at home (for non-fiber Cox internet service).Order Cox Internet Technicolor DOCSIS Cable Gateway CGM4140COM CGM4141COX User Manual May 4, 2017 Rev. 0.1 fDescription This is a DOCSIS cable gateway device including the following functionalities: DOCSIS 3.1 Cable Modem PacketCable 2.0 eDVA 2 port Gigabit Ethernet switch with advanced routing capability 802.11n WiFi interface at 2.4GHz 802.11ac WiFi interfaceIdentify Your Deco. Identify your Deco from the model list. 4. Connect Deco to your modem. Power off your modem. Connect your Deco to the modem and power them both on. If you don't have a modem, connect the Ethernet outlet directly to your Deco. Note: Plug your Deco directly into the wall instead of a power strip. 5.A more standard approach would be to connect the two routers together behind the modem. One of the following configurations. You could connect router A into the modem as normal and connect WAN from router B into A. This requires B to have a different network configured ( they both can’t be 192.168.1.x). MegADp.